Non Destructive Testing (NDT) plays an important role in the quality control, not only of the finished products, but also of half finished products as well as the initial raw materials. NDT can be used at all stages of the production process. It can also be used during the process of establishing a new technology by product quality or when developing a new product. Outside the manufacturing field, NDT is also widely used for routine or periodic control of various items during operation to ascertain that their quality has not deteriorated with use


These are some of the NDT Services that we currently provide to evaluate materials, components, and welds:

Industry2

Pipeline Integrity

  • ID/OD Metal-Loss features assessment with NDT systems (Automatic UT, Pit Gages, and Conventional UT)
  • Evaluation and Mapping out of Dents, Arc Burns, Buckles, Wrinkles, OD/ID Cracking, ERW/FLASH/DSAW Long Seam Flaws, Mechanical Damages and Stress-Corrosion Cracking
  • Advanced UT and Conventional UT sizing (Tip-Diffraction, TOFD, Phased Array) of ERW flaws and SCC type Cracks
  • Grind repairs on defects
  • Burst pressures calculation using Modified B31.G, 0.85DL and RStreng on Metal-Loss features
  • Result correlation from In-Line Inspection (ILI) results to as found conditions, interpreting ILI results and chainage of digs/features from Above Ground Marker (AGM) locations

Powergen2

Power Generation Inspection

  • Wind Turbine Evaluation of Extructural Welds
  • Turbine Components Inspection
  • Flow Accelarated Corrosion Assessment
  • Feeders Inspection
  • Piping and Tubing Inspection
  • High Energy Piping Inspections
  • Babbitt Bearing Inspections

industry3

Industrial Plants Inspection

  • Boilers and Pressure Vessels
  • Turbine Components Inspection
  • In-plant Piping
  • Storage Tanks
  • Welds
  • Piping and Tubing Inspection
  • High Energy Piping Inspection
  • Heat Exchangers Inspection
  • In-service and out-service Equipment Inspections

Mining3

Mining Inspection

  • General Piping, Vessels and Tank Inspections
  • Lifting Equipment Inspections, Scissor Trucks
  • Power Plant and Boiler Inspections
  • Phased Array UT of Gear Teeth
  • Phased Array UT of Gear Teeth in-lieu of MT
  • Ultrasonic Thickness and Examinations of Welds, Forgings and Castings
  • Advanced crack sizing using Phased Array UT, Tofd, Tip Diffraction, High Angle LW
  • Corrosion Mapping - Internal/External
  • Automated UT Services (AUT)
  • Crack Detection, Sizing and Monitoring
  • Phased Array in-lieu of RT for Piping/Vessel Welds

Aut 1

Advanced NDT Inspection

  • ASME Code Compliant Phased Array and Tofd
  • Advanced PA of Complex Geometries
  • Advanced UT Techniques
  • Crack Detection and Sizing
  • Detection and Monitoring of Hydrogen Blistering
  • Internal and External Corrosion Mapping
  • Lamination Mapping
  • Corrosion Mapping (Automated UT)
  • Data Analysis